Acer Ipimb-ar Rev 1.02a Manual Info

However, the good news is that the IPIMB-AR Rev 1.02A generally works perfectly fine with standard ATX power supplies from brands like Corsair or EVGA. It does not require proprietary voltage rails like some older Dell boards. If you are transplanting this board into a standard case, a generic 500W PSU will run it without issues.

Includes 1x PCIe 3.0 x16 slot (when using Ivy Bridge CPUs) and 3x PCIe 2.0 x1 slots. Connectivity and Storage Acer Ipimb-ar Rev 1.02a Manual

Note: Some Rev 1.02a boards lack a physical jumper and use a "CLR_CMOS" solder pad – short the two pads with a screwdriver tip for 5 seconds. However, the good news is that the IPIMB-AR Rev 1

| CPU | Core | TDP | Requires BIOS version | Notes | |-----|------|-----|-----------------------|-------| | Core 2 Quad Q6600 (G0 stepping) | Quad | 105W | R01.B0 (or later) | Maximum recommended | | Core 2 Duo E8400 | Dual | 65W | R01.B0 | Best performance/watt | | Pentium Dual-Core E5800 | Dual | 65W | Any | Stable and cool | | Celeron E3500 | Dual | 65W | Any | Budget option | | Core 2 Extreme QX9650 (130W TDP) or Xeon mods (LGA 771 to 775 adapters often fail on this board due to VRM limitations). Includes 1x PCIe 3

For users moving this motherboard into a new case, understanding the front panel and internal headers is critical. Front Panel Header (F_PANEL)

I could not locate an official or user-facing manual specifically titled in Acer’s public support databases or general documentation archives.