Actia Psa Xs Evolution 9780z5 Driver Link _verified_

Look for "" or a similar entry under USB controllers.

executable usually found in the DiagBox installation folder. Run the driver installer as an administrator plugging in the device. Hardware Connection : Plug the PSA XS Evolution into a USB 2.0 port. Check Device Manager actia psa xs evolution 9780z5 driver link

Download and install the correct USB driver to enable communication between the 9780Z5 interface and Windows-based diagnostic applications (e.g., DiagBox, PP2000, Lexia). Look for "" or a similar entry under USB controllers

: If the device is correctly installed, it should appear in the Windows Device Manager under "Universal Serial Bus controllers" as an ACTIA USB Devices Compatibility and Firmware OS Support Hardware Connection : Plug the PSA XS Evolution into a USB 2

Due to copyright and version control, we do not host direct files, but the following sources are trusted by professional diagnostic communities:

If the drivers are installed but DiagBox can't see the car, the firmware on your interface might be too old (or too new) for the software version you are running. Use the Interface Checker to "Flash" the firmware to match your DiagBox version. The 64-bit Problem

This often happens if you are using a USB 3.0 (blue) port. The older 9780.Z5 hardware prefers . If your laptop only has 3.0, try using a cheap USB 2.0 hub as a buffer. "Communication Error" in DiagBox